Designed for on-site assembly, the Amerikooler QC060677**FBSC quick-ship indoor walk-in cooler is constructed with modular wall, floor, and ceiling panels. It features durable, 26-gauge Acrylume® zinc-aluminum-coated steel exterior and interior walls that are stucco embossed and coated with acrylic for optimal corrosion resistance. Suitable for 600 uniformly distributed pounds of foot traffic per square foot, the 4-inch-thick floor panels are constructed of smooth aluminum. To maintain cool internal temperatures, the walls are lined with 4-inch-thick, water-resistant AK-XPS4 rigid foam insulation that’s permanently bonded to the primed metal panels and provides R-29 protection. Furthermore, all joints boast an airtight seal.

For simplified access, this unit features a 36-inch-wide by 76-inch-high door that closes flush against the non-conductive PVC door jamb. It’s supported by two heavy-duty super cam-rise spring-assisted hinges and shuts automatically with the attached door closer. Operators can access the cooler’s interior using the heavy-pull, deadbolt-keyed handle, which has an inside safety release to prevent staff from becoming trapped inside. To deter cold air from leaking, the door jamb is lined with a three-side magnetic gasket and double wiper. Inside the door jamb is a center-mount LED light fixture, which illuminates the cooler, as well as a digital thermostat and on/off pilot light switch so staff can monitor internal temperatures.

To generate temperatures as low as 35 degrees Fahrenheit, the Amerikooler QC060677**FBSC walk-in cooler utilizes a Heatcraft Worldwide BOHN PT0046MBNAMSA self-contained refrigeration system. For safe operation, it has a maximum ambient temperature requirement of 90 degrees Fahrenheit. This system is top-mounted, and to streamline installation, it comes fully-assembled and pre-wired. Overall, this cooler measures 5 feet 10⁵/₈ inches wide by 5 feet 10¹⁄₈ inches deep by 7 feet 7 inches high.

Product Details

• Indoor use
• Modular wall, floor, and ceiling panels
• Airtight joints
• 26-ga. stucco embossed, corrosion resistant, acrylic-coated Acrylume steel exterior and interior walls
• 4-in.-thick floor panels constructed of smooth aluminum
• Floor can support 600-lbs. per square foot when evenly distributed
• 4-in.-thick water-resistant AK-XPS4, rigid foam insulation permanently bonded to primed metal surfaces
• R-29 insulation value
• Assembly required

Door

• 36 in. W x 76 in. H door opening
• Flush and self-closing
• 2 heavy-duty super cam-rise spring-assisted hinges
• Door closer
• Heavy-pull deadbolt-keyed handle features inside safety release
• Three-sided magnetic gasket and flexible double wiper
• Heavy-duty, non-conductive PVC door jamb
• Center-mounted LED light fixture
• Digital LED thermometer
• On/off pilot light switch

Refrigeration System

• Heatcraft Worldwide BOHN PT0046MBNAMSA top-mounted refrigeration system
• Self-contained
• Generates temperatures as low as 35 degrees F
• Maximum ambient temperature: 90 degrees F
• Ships fully assembled and pre-wired

Dimensions and Utilities

• 5 ft. 10⁵/₈ in. W x 5 ft. 10¹⁄₈ in. D x 7 ft. 7 in. H
• 208-230 V/60 Hz/1 ph

Product Features

*Free shipping on Amerikooler QC060677**FBSC within the 48 contiguous states.

From The Manufacturer

Quick Ship Indoor Walk-In Cooler, 5′-10 5/8″ W x 5′-10 1/8″ L x 7′-7″ H, With Floor, 4” thick AK-XPS4 insulation providing R-29 for coolers & R-32 for freezers, 26 gauge stucco embossed corrosion resistant acrylic coated Acrylume on all interior & exterior surfaces, NSF aluminum floor rated at 600 Lbs./sq. ft. of uniformly distributed load, flush self-closing door, digital LED thermometer with pilot light switch, super cam-rise spring assisted hinges & door closer, 35°F, top mount, self-contained, indoor refrigeration, PT0046MBNAMSA, sized at 90°F ambient temperature, ships in 48 hours – subject to terms & conditions, UL, Made in USA (Note: Customers ordering this unit for installation in California, Florida, Oregon, and Washington may face state-specific restrictions on its use. Please contact SAH Kitchen Equipment Customer Care at 1-800-541-8683 for assistance.)

*Image may not depict product color, inclusions or accessories.